About the RV-7 About Us Construction Log Links
to Log Index
Task: Assembled flaps. Riveted the FL-706A/B
mounting plates into place and riveted the FL-705 ribs to
the back of the FL-702 bottom skin.
started by riveting the FL-706B mounting plate to the FL-704
spar. I then riveted the K1000-4 nutplate on.
I then riveted FL-706A onto the FL-703 spar.
Next I riveted the
aft hole in the FL-705 ribs to the FL-702 bottom skin.
flap being clecod together.
Repeated the riveting on the right flap.
Left flap clecod together. Ready for riveting. The procedure
is to make a jig to hold the flap in place vertically and
rivet with the spar removed. I still need to make the jig.
Right flap clecod
together, ready for riveting.
site represents the work of Trevor Conroy and in no way implies
the correct or suggested method of constructing an amateur built