Trevor & Dewey's RV-7 Construction Log


Back to Log Index

Date: 09/11/2010
Task: Worked on bottom wing skins

Fished deburring all of the bottom wing skins today. I also drilled all the holes for the wing access plate nutplates. There are 4 #6 screws that go into the spar and several #8 screws that go around the parimeter of the skin. I also edge deburred, final drilled, hole deburred, and dimpled the wing access plates. Lastly, I ran the pitot tube and AOA pressure port plubing in the left wing and roll servo wires in the right wing.