Trevor & Dewey's RV-7 Construction Log
 
 

Wings

Back to Log Index

Date: 08/26/2010
Time:
2.0
Task: Fabricated wing skin lap joint

Today I formed the lap joint on the top skins so they would lay down correctly where they join in the center of the wing. I used an idea from the VAF.com forums to cut a small square out from the outter top end of the inboard top skin. This worked very well and the skin laid down nicely. I then filed the endges to form a nice angle, buffed, and primed the edge. I then clecod the top skins on the right wing in preperation for riveting.