to Log Index
Task: Riveted ribs to spars and assembled
Fabricated a piece of 1x1x1/8 angle to hold the outboard end
of the wing spar on the jig. As it turns out, I will need
something with a larger dimension. The spar must be offset
about 1 inch from the mount so the skin and hang over it where
the fiberglass fairing attaches.
Right wing hung on the jig!
Built the leading
edge and attached it to the spar. Looks like a wing!
Riveting the left wing ribs to the main spar. It went much
faster today after had completing the right wing yesterday.