to Log Index
Task: ELT Mount & Seatbelt wear blocks
the ELT mounting bracket today. I match drilled the two #19
and countersunk the bracket from AmeriKing appropriately.
Next I fabricated the seatbelt wear blocks out of the hard
plastic material provided. It was pretty straightforward and
all went as planned.We first drilled the lower strip (F-7114B)
to the baggage turtledeck and then placed the vertical piece
(F-7114C) in and match-drilled. I also fabricated the 1/2
x 1/2 washers from the 0.40 material provided.